product

Products

Infrared Network Camera Home>Products>H.264 Network Video Decoder

OMC-IP200D series Network Video Decoder can cost-effectively have your network-based video divides including IP cameras and network video servers connected with analog video devices like analog monitor or television. It support OMC-900 series network cameras and IP200 Series video servers, can quickly convert H.264 digital videos into analog signals and easily output them to existing analog systems. With the Ethernet interface, users can easily get access to switch the settings of each device within the system through the build-in web page.? The IP200D can decode one channel of D1 video stream.

⊙ H.264 Real Time Decoding
⊙ 1 Channel Real Time Decoding
⊙ Support 16pcs IP cameras or Network video Servers in group display
⊙ Audio Decoding
⊙ RS-485 interfaces support transparent transmission mode. Remote hosts can control serial devices through the RS-485

System	Model No.	IP200D
	CPU	32 Bit RISC Processor
	RAM	32MB SDRAM
	ROM	8MB FLASH ROM
Network	Protocol	TCP/IP, UDP, DDNS, DHCP, PPPOE
Network	Interface	10M/100M RJ45 Ethernet
Video	Algorithm	H.264 video decoding
	Output	1CH analogue output
	Resolution	PAL: 720576 (25 fps) NTSC: 720480 (30 fps)
	Display	Single/ Quad display, support 16 IP Address Automatic Switch
Audio	Audio	Duplex audio communication
	compression	G.726
	Microphone	1ch
	S/N Ratio	more than 60dB
	sampling rate	64K
Interface	power source	12V DC
	Ethernet	RJ45
	GPIO	2ch alarm in/ 2ch alarm out
	Serial port	RS485
Electronic	Power Supply	DC 12V
Electronic	Power consumption	4 Watts
Operation environment	temperature	-10 to 50 degree
Operation environment	humidity	RH 95% Max
Other	Dimensions	160 (W) × 200(L)×45(H) mm
Other	Weight	0.9KG