|
  Home>Products>H.264 Vandal Proof IP Dome camera
| |
 |
 |
| |
OMCON OMC-932IPDVF-P? is a vandal proof fixed IP dome camera for use in a wide range of security and monitoring applications. It has 1/3” Sony CCD imaging sensor for high quality images up to resolution of 720*576(D1) and maximum frame rate of 30 pictures per second. This network camera can be powered conventionally or by using Power over Ethernet( PoE), which enables the camera to be powered using a single Ethernet cable. Advanced features include image transfer to FTP server or notification by email when an alarm triggers such as motion detection. It also has USB 2.0 or SD card for alarm record (sensor alarm, motion detection alarm) or I frame record(record one picture per second). Like all network cameras offered, the OMCON OMC-932IPDVF-P has a built-in web server and can be viewed over a Local Area Network (LAN) or Wide Area Network (WAN)
OMCON 932IPDVF-P Series adopts H.264 to compress the video signal and audio signal simultaneously into hardware compression; transmit the compressed bit rate through networks, display real-time video and audio; support IE browsing, bi-directional voice communication and so on. |
| |
 |
| |
⊙ Vandal Proof with newest industry design
⊙ Support PoE (Power over Ethernet)
⊙ Support SD card record including motion detection record, time schedule record and key frame record.
⊙ Real Time H.264 high speed hardware compression
⊙ Support FULL D1 (720*576), Half-D1 (720*288) CIF (352*288) resolution.
⊙1/3” Type interline transfer CCD image sensor makes for a sharper image with no image smear or blurring
⊙ Built-in web server
⊙ support DDNS for dynamic IP application
⊙Video Motion Detection with configurable detection areas and sensitivity levels
⊙Privacy zone masking can be set to conceal areas of the image for privacy
⊙ Support pre-alarm and post alarm record
⊙ Adjustable Network bandwidth
⊙Analogue composite out allows for easy set up of camera or an alternative method of viewing
|
|
| |
 |
|
| |
camera spec |
Model No. |
OMC-932IPDVF-P |
OMC-935IPDVF-P |
|
Image sensor |
1/3” Sony 420tvl |
1/3” Sony 520tvl |
|
Effective Pixels |
510 (H) × 492 (V) |
768(H)*494(V) |
|
Mini Illumination |
1 Lux |
0.5Lux |
|
|
Day Night |
yes |
|
|
|
Scanning System |
Internal |
Lens |
4mm Lens (6mm, 8mm, 8mm fixed lens, Varifocal lens optional) |
S/N Ratio |
>48 Db?? |
System |
CPU |
32 Bit RISC Processor |
|
|
RAM |
32MB SDRAM |
|
|
|
ROM |
8MB FLASH ROM |
|
|
Network |
Protocol |
TCP/IP, UDP, DNS, DDNS, DHCP, PPPOE |
|
Interface |
10M/100M RJ45 Ethernet |
|
|
Video |
Algorithm |
H.264 video compression |
|
Bit Rate |
16Kbit- 4M bitps |
|
|
|
Resolution |
PAL: 352*288 (25fps) 720*576 (25 fps) |
|
|
NTSC: 352*240 (30fps) 720*480 (30 fps) |
|
Audio |
Audio |
Duplex audio communication |
|
|
Microphone |
1ch |
|
|
|
S/N Ratio |
more than 60dB |
|
|
sampling rate |
16K |
|
|
|
output bit rate |
20k bit |
|
|
|
Alarm |
alarm mode |
motion detection, sensor alarm, video lost alarm |
input/output |
1ch input/ 1ch output |
|
|
Interface |
power source |
48V DC |
|
|
|
Video Loop out |
1ch(optional) |
|
|
|
Ethernet |
RJ45 |
|
|
|
GPIO |
Audio Input |
RS485（optional） |
|
Audio Output |
USB 2.0 (Optional) |
|
Client PC requirement |
Operation System |
Windows 2000, XP |
|
|
Browser |
Internet Explorer 5.0 or above version |
|
Microsoft DirectX |
Version 9.0 |
|
|
|
Free Software |
Remote View |
Simultaneous View 16 channels CIF real time if PC configuration and network bandwidth are good enough |
|
Remote record |
free 36CH/16CH surveillance and record software |
Remote setting |
support remote configuration |
|
|
Operation environment |
temperature |
0 to 50 degree |
|
|
humidity |
RH 95% Max |
|
|
|
Extended No |
Without PoE,
with SD Rec |
OMC-932IPDVF? OMC-935IPDVF |
|
Without SD Rec
Without PoE |
OMC-932IPDV?? OMC-935IPDV |
|
Other |
Dimensions |
145(D)*150(H)mm |
|
|
Weight |
3KG |
|
|
|
|
|
|
